AppliClue
ENESFRDE

Indicator

GE / Dishwasher

NORMAL WASH flashing + beeping

The panel reports Control Error; reset and restart, then use a 30-second breaker disconnect if the error persists.

What it means

The panel reports Control Error; reset and restart, then use a 30-second breaker disconnect if the error persists.

This explanation is shared only by models whose manufacturer documents the same code, meaning, and guidance.

Manufacturer guidance

  1. Press START/RESET to stop the beep and allow reset.
  2. Restart the wash cycle.
  3. If recurring, switch power off at the breaker for thirty seconds; request service if still present.

Manufacturer source

Models documented with this signal

Select your exact model below to open its manufacturer source. Manual editions and model revisions can differ.

If there is a safety risk, stop using the appliance and follow the manufacturer’s instructions.