Signal or code
Error codes and display signals
The official manual linked for this model documents these messages. Some indicators apply only to variants that display them; each entry is labeled as a code, indicator, or status.
No matching signal for this model.
Model and error-code facts may be shown in the language of the original source.
Official PDF manual
Jump to manual pages
Open the official PDF at pages that document signals for this model.
MODEL OVERVIEW
About this model: GE PSB9120BLTS
GE Profile PSB9120BLTS is a 30-inch-class Advantium wall oven in fingerprint-resistant black stainless. Its PSB9120 manual documents SENSOR ERROR in microwave sensor cooking.
Plan for this black-stainless installation
PSB9120BLTS is the GE Profile Advantium single wall oven with a nominal 30-inch cabinet designation and fingerprint-resistant black stainless appearance. GE lists an overall width of 29.75 inches but a cutout width of 25.125 inches. Those numbers describe different parts of an installation and should not be interchanged. The product also lists under-counter installation flexibility, yet an actual project still needs the model's installation instructions, opening height and depth, electrical supply and surrounding cabinetry checked. GE says the model allows use with a JX2200 or JX2201 storage drawer; that statement is compatibility, not a promise that a drawer is shipped with the oven. The PSB9120 name on the official manual cover gives the family, and the BLTS suffix on the exact product record identifies the black stainless version. Its 1.70-cubic-foot capacity describes one cavity with several cooking technologies, not multiple stacked ovens.
Use one cavity for several heat paths
That shared cavity combines a 950-watt microwave with Speedcook, convection, broil, proof and warm options. The exact product lists a 16-inch turntable, glass-touch controls and more than 175 programmed choices. The manual places the nonstick metal tray on the turntable for speedcook and baking, but the clear glass tray there for microwave use. The trays are not interchangeable simply because both fit inside. It also describes Warm as keeping already-hot food at serving temperature and Proof as providing a suitable environment for yeast dough, which are distinct from reheating leftovers by microwave sensor. Favorite Recipe can retain up to thirty settings that an owner chooses to save. When a meal performs unexpectedly, record whether the dial selected a menu food, speedcook, microwave Cook, or Reheat; each uses a different control path. The turntable must remain seated in every mode, so removing it is not a diagnostic shortcut.
Keep the microwave sensor sequence intact
Sensor Cook and Reheat are confirmed on the exact BLTS product page. In the linked manual, sensor cooking belongs to microwave mode and relies on detecting steam from food. Put microwave-safe cookware on the clear glass tray; use a suitable vented covering, with the outside of the dish and inside of the oven dry. The initial phase does not necessarily show a countdown. GE says to keep the door closed until time begins counting down. If it is opened during sensor cooking, SENSOR ERROR can appear. Close it and press START/PAUSE to continue. A very warm cavity left by speedcook may switch the oven to time cooking; that is a documented behavior, not proof that the microwave sensor failed. Do not repeat the same sensor program on one portion if it needs more cooking. COOK BY TIME is the stated way to add time after the first run.
Read the exact message before resetting anything
The troubleshooting table also links SENSOR ERROR to choosing a food type or amount that does not match the actual dish. The suggested response is CANCEL/OFF and a program that fits. It separately explains that steam may not be sensed when plastic wrap has no vent, a lid seals too tightly or a liquid was covered. Release the steam as directed before trying again. None of those lines decodes the two-word display into a particular replacement part. Give service the exact model, food, portion, mode, tray, cover and point at which a door was opened if the message continues under correct conditions. The same table distinguishes Control is LOCKED, meaning the control has been locked, from a blank screen. The clock intentionally disappears after thirty seconds idle to reduce standby power and returns in use. Neither state should be recorded as SENSOR ERROR merely because cooking will not start.
Care for finish and controls without guessing
The black stainless finish is an exact product attribute; the owner's cleaning pages are broader family guidance. Use the manual's gentle cloth and nonabrasive approach inside the cavity, allow trays to cool before washing, and keep the turntable support area clear. Avoid claiming that the fingerprint-resistant finish authorizes a particular polish or harsh cleaner, since the family pages are not a finish-specific test. If the controls look inactive, first open the door to see whether the idle clock wakes, then look for the separate locked-control message. If a sensor cycle does show the error, note what happened before touching Cancel or repeating a menu. A storage drawer, if installed, is a separate accessory; it cannot remedy a microwave sensing condition. Keeping installation, normal display behavior and cooking diagnostics distinct makes the BLTS article useful to an owner with this precise model.
Verified model details
Check 29.75-inch overall and 25.125-inch cutout widths separately
Source for this detail · Source page: 1Sensor Cook and Reheat use the microwave path
Source for this detailA dark idle clock and Control is LOCKED are separate from SENSOR ERROR
Source for this detail · Source page: 29
This description summarizes the linked source documents; check each cited source for your exact model and region.
Manufacturer source
Open official source
GE Profile™ 30 in. Single Wall Oven with Advantium® Technology - PSB9120BLTS - GE Appliances
Open official sourceIf there is a safety risk, stop using the appliance and follow the manufacturer’s instructions.