Signal or code
Error codes and display signals
The official manual linked for this model documents these messages. Some indicators apply only to variants that display them; each entry is labeled as a code, indicator, or status.
No matching signal for this model.
Model and error-code facts may be shown in the language of the original source.
Official PDF manual
Jump to manual pages
Open the official PDF at pages that document signals for this model.
MODEL OVERVIEW
About this model: GE PGB916SEMSS
PGB916SEMSS is a 30-inch GE Profile gas range with a five-cubic-foot convection oven, oval center burner, non-stick griddle, warming drawer and documented F oven-control pattern.
Identify the three cooking zones
PGB916SEMSS is the 30-inch free-standing GE Profile gas range whose exact product title identifies self-clean convection and an electronic warming drawer. The oven holds five cubic feet, while the cooktop has a 6,000-BTU oval center burner and a non-stick griddle. This is a distinctive layout: the center burner supports the griddle rather than acting as a second oven or the source of an electronic oven code. Heavy cast grates span the surface burners. The owner-manual cover lists several related gas ranges including PGB916, so the full SEMSS suffix and GE product facts should govern which features are assigned here. Before ordering a grate, burner head or oven control, read the actual model and serial label. An ignition click at LITE is expected as the spark system works; page 8 notes all burners spark when one is selected. Flame should remain under the cookware base, not climb its sides. Griddle placement and cleaning deserve separate attention from the oven display.
Separate gas ignition from convection
The exact range lists convection technology. Its guide explains that a fan circulates heated air for multi-rack baking and roasting, while BAKE remains available for traditional recipes. The rack diagram supplies five common positions plus a special low R position for a large item; do not pull a rack from R as though it were a normal sliding level. The oven panel shown in the family guide includes Bake, Broil, convection and Start, but some pad labels in the shared manual are marked on some models. The exact GE listing confirms convection here; it does not make every optional proof or lockout pad certain. During a power cut, the gas surface may be lit only with the manual's extreme-caution method when lockout is not engaged, but page 13 explicitly forbids trying to run the electric-ignition oven. Its burner stops if power fails and cannot relight until power returns. Treat this oven limitation separately from surface flame behavior. The Sabbath instructions apply to upper-oven baking or roasting, not to convection or broil.
Use the drawer around cleaning cycles
The warming drawer is a separate temperature-holding space. GE gives it electronic controls and Low, Medium and High settings. Page 28 says to begin with hot, cooked food and to use the drawer to maintain serving temperature; it is not an ordinary refrigerator-to-table reheater. Its control is also distinct from oven Clear/Off: the manual says that pressing Clear/Off does not turn the drawer off and that the Warming Drawer pad is used to cancel it. A self-clean cycle excludes drawer use. Prepare the oven for cleaning by removing cookware, the broiler pan and grid, probe and foil, wiping heavy spillovers, and leaving the door to lock and cool as directed. The condition of racks matters: the shared guide distinguishes nickel racks to remove from gray porcelain racks that may remain. Do not use a drawer issue to infer that the oven itself has an F code, or assume a locked clean door is broken before its temperature has fallen below the lock threshold.
Interpret an oven F signal
On physical PDF page 11, flashing F with a number or letter and an oven-control signal is expressly called a function error. Touch Clear/Off, let the oven cool for one hour and put it back into operation. If the function pattern repeats, disconnect oven power and request service. Copy all displayed characters and note whether convection, Bake, Broil or self-clean was active, plus any outage just before the message. The shared guide does not map an F suffix to a burner, temperature sensor or control board, so a component name from an unsupported online list would overstate this evidence. A blinking time after lost power has its own explanation because the clock and timed functions must be reset. A display lock indication likewise needs its documented control setting checked. This separation of oven error, clock state, burner spark and drawer operation gives a technician a more useful report than calling every unusual indication the same fault.
Verified model details
Surface-burner ignition and oven ignition behave differently during an outage.
Source for this detail · Source page: 1The warming drawer holds already-hot food and is unavailable during self-clean.
Source for this detail · Source page: 11An F pattern belongs to the oven display, not a numbered diagnosis of a gas burner.
Source for this detail · Source page: 28
This description summarizes the linked source documents; check each cited source for your exact model and region.
Manufacturer source
Open official source
GE Profile™ 30" Free-Standing Self Clean Convection Gas Range with Warming Drawer - PGB916SEMSS - GE Appliances
Open official sourceIf there is a safety risk, stop using the appliance and follow the manufacturer’s instructions.