MODEL PROFILE
Signal or code
Error codes and display signals
The official manual linked for this model documents these messages. Some indicators apply only to variants that display them; each entry is labeled as a code, indicator, or status.
No matching signal for this model.
Model and error-code facts may be shown in the language of the original source.
Official PDF manual
Jump to manual pages
Open the official PDF at pages that document signals for this model.
MODEL OVERVIEW
About this model: Electrolux ERBB0920AP
Exact ERBB0920AP guide to its six documented fault codes, separate warm-freezer warning and built-in cooling context.
Identify the compact built-in cabinet before reading a fault
ERBB0920AP is Electrolux Canada's panel-ready bottom-freezer refrigerator. The product title rounds it to a nine-cubic-foot class, while the exact specification gives 8.62 cubic feet in total: 6.25 for fresh food and 2.37 for frozen food. Its width is 21 5/16 inches, and the page lists a 69 15/16-inch height with the hinge. Those figures matter when identifying this narrow built-in unit among larger freestanding Electrolux refrigerators. A custom front panel and handle are required for the finished kitchen appearance and are not supplied with the appliance. The fresh-food space has five fixed glass shelves, three door bins, a dedicated deli drawer and a FreshZone crisper; three pull-out drawers organize the bottom freezer. Confirm this arrangement and the ERBB0920AP rating label before applying the control and code explanations below.
Read the two temperature displays and temporary modes
The linked owner's guide pictures a ten-position control strip with separate refrigerator and freezer temperature displays. The Chiller Zone button changes the crisper setting from 37°F down to 27°F, a range different from the main refrigerator's 34°F to 43°F adjustment. The freezer setting runs from 5°F to -9°F. Fast Cooling selects 36°F in the fresh-food compartment for 24 hours, while Fast Freezing chooses -13°F in the freezer for the same period. Eco selects 41°F for the refrigerator, 0°F for the freezer and 37°F for the Chiller Zone. Holiday keeps the freezer at 0°F but raises the refrigerator setpoint to 63°F, so it is not a mode for perishable food left in that compartment. These settings are deliberate operating choices; a changed temperature number alone is not a fault code. The exact product page also confirms a door-ajar alarm and vacation mode.
Separate the six printed faults by affected area
Page 15 of the official PDF has a real error table for this display. F2 denotes a chiller-zone issue, F3 a refrigerator-compartment issue, and F4 a freezer-compartment issue. F5 concerns defrosting. The remaining entries cover different systems: 2E is a freezer fan or motor malfunction, whereas CE means an appliance-control issue. The guide does not identify a particular replaceable part for F2 through F5, and it does not turn CE into a board-replacement instruction. Record the complete characters shown, including the difference between the numeral 2 in 2E and the letter C in CE, before seeking service. The manual says the refrigerator may continue operating despite one of these errors, so an illuminated cabinet or running compressor is not proof that the displayed fault has cleared. Treat a persistent code as a documented malfunction, not as a temperature setpoint to adjust away.
Distinguish a warm-freezer warning from a code
The same troubleshooting page describes a separate freezer-temperature alarm: the unit sounds and the temperature digits flash while the freezer is warm; a button silences the sound, but the digits keep flashing until the compartment cools. Its printed Fahrenheit and Celsius values in that note do not agree mathematically, so use the visible warning and the state of stored food rather than that inconsistent number as a precise threshold. A door-ajar alarm is another distinct signal on this exact product. If the cabinet simply seems too warm without F2, F3 or F4, the manual recommends changing the setting and allowing 24 hours to stabilize. It also warns that packed shelves and blocked air ports reduce circulation. If the appliance is not running, check its plug and breaker; the guide notes that a normal defrost interval can require a 20-minute wait. None of those checks erases a recurring diagnostic code.
Check the built-in ventilation before interpreting cooling behavior
Installation matters unusually much for this panel-ready ERBB0920AP. The guide calls for at least 1/2 inch behind the appliance, a 1 1/2-inch-deep rear air channel and a combined opening area of at least 31 square inches through the cabinet ventilation path. It says not to obstruct the lower front. Restricted airflow can lengthen compressor run time and raise energy use, so a warm cabinet should prompt a look at the actual niche before changing multiple settings. The guide also excludes locations below 55°F or above 110°F and asks for a level, strong floor. For day-to-day care, wipe door gaskets with a soft cloth and avoid crowding food against air outlets. The refrigerator uses flammable R-600A refrigerant according to its exact product specification; the manual reserves refrigerant work for trained service personnel. These owner-level observations help describe a problem accurately without turning a display code into an unsupported repair instruction.
Verified model details
The exact panel-ready model has 8.62 cu. ft. and three freezer drawers.
Source for this detailThe linked owner PDF identifies F2, F3, F4, F5, 2E and CE.
Source for this detail · Source page: 15A flashing freezer temperature is a separate alarm from the six codes.
Source for this detail · Source page: 15
This description summarizes the linked source documents; check each cited source for your exact model and region.
Manufacturer source
Open official source
9 cu. ft. Counter-Depth Built-In Combi-Bottom Refrigerator ERBB0920AP | Electrolux Canada
Open official sourceIf there is a safety risk, stop using the appliance and follow the manufacturer’s instructions.