AppliClue
ENESFRDE

MODEL PROFILE

Dishwasher / Bosch

SHV78CM3N

Find the official source for this exact appliance model.

Signal or code

Error codes and display signals

The official manual linked for this model documents these messages. Some indicators apply only to variants that display them; each entry is labeled as a code, indicator, or status.

E:20-60Error codeThe appliance detected limescale on the heating element.E:21-30Error codeDishware blocks the intake opening of the Zeolite container.E:30-00Error codeThe water protection system is active.E:31-00Error codeThe water protection system is active.E:32-00Error codeA water inlet problem: the supply valve may be closed or clogged, or the inlet hose may be blocked.E:34-00Error codeWater keeps entering the appliance.E:61-02Error codeThe drain pump cover is loose or a foreign object blocks the pump.E:61-03Error codeWater is not draining; the disposal plug, drain hose, pump cover, or drain-hose high loop may be involved.E:61-60Error codeThe dishwasher has a technical fault.E:90-01Error codeThe supply voltage is too low; Bosch says this is not an appliance fault.E:92-10Error codeThe lower spray arm cannot rotate or is not fitted correctly.E:92-40Error codeThe filters are dirty or blocked.

Model and error-code facts may be shown in the language of the original source.

Official PDF manual

Jump to manual pages

Open the official PDF at pages that document signals for this model.

Source page 37E:20-60, E:21-30, E:30-00Source page 38E:31-00, E:32-00, E:34-00, E:61-02, E:61-03Source page 39E:61-60, E:90-01, E:92-10, E:92-40

MODEL OVERVIEW

About this model: Bosch SHV78CM3N

The Bosch SHV78CM3N is an 800 Series 24-inch dishwasher with a custom-panel-ready front, specified for 16 place settings at 42 dBA. Its listed programs include Heavy, Auto and Normal, with Sanitize and Crystal Dry among the available options. PrecisionWash with the PowerControl spray arm and selectable ZoneControl regions provide its wash setup; Bosch lists CrystalDry for drying.

Fit and installation

The front is designed to take a custom kitchen panel; Bosch says the panel and handle are sold separately. That makes the cabinet-facing appearance an installation choice, while the machine underneath remains the SHV78CM3N. Bosch gives body dimensions of 33 7/8 x 23 9/16 x 23 1/16 inches, in height-width-depth order, and a required opening of 33 7/8 in x 24 in x 24 in. Measure the opening and consult the installation instructions; the cutout and appliance measurements serve different purposes. Bosch labels this installation type Full-integrated. That mounting category is separate from the opening measurements and should be matched to the installation guide before planning a replacement front.

Source for this detail · bosch-home.com

Program choices

The named on-machine programs for SHV78CM3N are Heavy, Auto, Normal, Speed 60, Favorite. The names alone do not fix a run time or prove which program suits a particular load. On this exact listing, Heavy is an appliance program while Energy Save is in the Home Connect-only list. Keep those access routes separate when a household expects a control to be on the physical selector.

Source for this detail · bosch-home.com

Model configuration

Bosch lists SHV78CM3N as a 800 Series built-in dishwasher with room for 16 place settings and a published 42 dBA sound rating. The model number matters when reading support material: similarly named units can have different door treatments, program menus or indicators. ZoneControl Front appears in the published option list, whereas Energy Save is identified with the connected menu. An option can depend on the selected program; the specification alone does not prove every combination is available.

Source for this detail · bosch-home.com

Drying and controls

For drying, Bosch specifies CrystalDry, PureDry on SHV78CM3N. Crystal Dry also appears in its selectable options. If a load of plastics or concave dishes stays damp, check whether that option was used before assuming a system fault. Use the manual's loading and rinse-aid advice when assessing drying results. The red InfoLight indication reports cycle status. Confirm the program has ended before judging a damp load; a fault pattern should instead be matched to its own manual entry. This custom-panel model lists a red InfoLight. Its floor projection is useful when the furniture front conceals the top-edge controls; wait for the running cue to end before evaluating the dried load.

Source for this detail · bosch-home.com

Reading the manual diagnostics

The linked manual for SHV78CM3N gives individual alphanumeric faults rather than a single generic 'dishwasher error.' E:30-00 and E:31-00 concern active water protection and call for closing the water valve and contacting Bosch. E:32-00 instead points to the inlet path, such as a closed valve or kinked hose; E:34-00 describes water continuing to enter. These similar-looking numbers lead to different checks, so read the full characters on the display before taking action. A further exact-manual example is E:20-60: it describes limescale on the heating element; the guide calls for descaling. This is a different subsystem from the other codes above, so record the complete display before choosing an owner-level check. Compare E:61-02, which concerns a loose pump cover or an object blocking the pump; use the manual’s safe pump procedure; the two entries lead to different checks.

Source for this detail · media3.bsh-group.com · Source page: 37Source for this detail · media3.bsh-group.com · Source page: 38Source for this detail · media3.bsh-group.com · Source page: 39

Verified model details

This description summarizes the linked source documents; check each cited source for your exact model and region.

Manufacturer source

Open official source

Official source linked

Bosch SHV78CM3N dishwasher product page and manuals

Open official source

If there is a safety risk, stop using the appliance and follow the manufacturer’s instructions.

← Back to all models