MODEL PROFILE

Dishwasher / Bosch

SHP95CM5N

Find the official source for this exact appliance model.

Signal or code

Error codes and display signals

The official manual linked for this model documents these messages. Some indicators apply only to variants that display them; each entry is labeled as a code, indicator, or status.

Model and error-code facts may be shown in the language of the original source.

Official PDF manual

Jump to manual pages

Open the official PDF at pages that document signals for this model.

MODEL OVERVIEW

About this model: Bosch SHP95CM5N

The Bosch SHP95CM5N is a 500 Series 24-inch dishwasher with top controls and an anti-fingerprint stainless-steel finish, specified for 16 place settings at 38 dBA. Its listed programs include Heavy, Auto and Normal, with Sanitize and Extra Dry among the available options. Bosch lists PrecisionWash for washing and PureDry® for drying; Home Connect supports remote monitoring and control.

Fit and installation

Its exterior is listed as stainless steel anti-fingerprint, with a pocket handle design. This is the version to compare with a replacement if visible finish and door grip matter. Bosch gives body dimensions of 33 7/8 x 23 9/16 x 23 3/4 inches, in height-width-depth order, and a required opening of 33 7/8 in x 24 in x 24 in. Measure the opening and consult the installation instructions; the cutout and appliance measurements serve different purposes. Bosch lists a 67-inch power cord. Compare the actual outlet location with the installation guide; cabinet dimensions alone do not establish whether that cord reaches.

Source for this detail · bosch-home.com

Program choices

The named on-machine programs for SHP95CM5N are Heavy, Auto, Normal, Speed 60, Favorite. The names alone do not fix a run time or prove which program suits a particular load. On this exact listing, Normal is an appliance program while Rinse is in the Home Connect-only list. Keep those access routes separate when a household expects a control to be on the physical selector.

Source for this detail · bosch-home.com

Model configuration

Bosch lists SHP95CM5N as a 500 Series built-in dishwasher with room for 16 place settings and a published 38 dBA sound rating. The model number matters when reading support material: similarly named units can have different door treatments, program menus or indicators. Remote Start appears in the published option list, whereas Rinse is identified with the connected menu. An option can depend on the selected program; the specification alone does not prove every combination is available.

Source for this detail · bosch-home.com

Wash and loading

Bosch describes a standard third rack on this model. It creates a separate place for flatware and awkward small utensils, leaving the main racks for larger dishes; verify clearance when placing tall pieces below it. The product page also names EasyGlide racks, a loading convenience rather than a wash-cycle setting. The product sheet does not list a built-in water softener, so do not assume a salt reservoir is present. The owner guide also asks that the detergent dispenser lid remain unobstructed: a tall item can prevent detergent release even when the spray arms turn freely. If a tablet remains in the compartment, inspect that clearance as a separate loading check.

Source for this detail · bosch-home.comSource for this detail · media3.bsh-group.com

Drying and controls

For drying, Bosch specifies PureDry on SHP95CM5N. The drying option in the program list should be read together with this installed system. Plastics, concave items and closely nested dishes can retain droplets even after a completed program. Use the manual's loading and rinse-aid advice when assessing drying results. The red InfoLight indication reports cycle status. Confirm the program has ended before judging a damp load; a fault pattern should instead be matched to its own manual entry.

Source for this detail · bosch-home.com

Reading the manual diagnostics

For the steady-light pattern, Bosch's steps cover external drain and inlet checks: confirm the disposal plug, look for a bent hose, verify the water valve and make sure the pump cover is secured. A continuing problem belongs with Bosch support; suspected low voltage belongs with an electrician. The flashing pattern has its own power-reset and service instructions. On SHP95CM5N, these are indicator meanings, not invented E-numbers, and the cited manual table below should guide any action. The steady four-LED pattern can also reflect low supply voltage; Bosch directs that issue to an electrician. The same table also notes: Four LEDs flashing together have their own technical-fault response, including the manual’s reset and service sequence. Match that separate possibility to the symptom before acting.

Source for this detail · media3.bsh-group.com · Source page: 34Source for this detail · media3.bsh-group.com · Source page: 35

Verified model details

This description summarizes the linked source documents; check each cited source for your exact model and region.

Manufacturer source

Open official source

Official source linked

Bosch SHP95CM5N dishwasher product page and manuals

Open official source

If there is a safety risk, stop using the appliance and follow the manufacturer’s instructions.

← Back to all models