MODEL PROFILE
Signal or code
Error codes and display signals
The official manual linked for this model documents these messages. Some indicators apply only to variants that display them; each entry is labeled as a code, indicator, or status.
No matching signal for this model.
Model and error-code facts may be shown in the language of the original source.
Official PDF manual
Jump to manual pages
Open the official PDF at pages that document signals for this model.
MODEL OVERVIEW
About this model: Bosch SHP78CM5N
The Bosch SHP78CM5N is an 800 Series 24-inch dishwasher with top controls, a pocket handle, and an anti-fingerprint stainless-steel finish, specified for 16 place settings at 42 dBA. Its listed programs include Heavy, Auto, Normal and Speed 60, with Sanitize and Crystal Dry among the available options. PrecisionWash with the PowerControl spray arm and selectable ZoneControl regions provide its wash setup; Bosch lists CrystalDry for drying.
Fit and installation
Its exterior is listed as stainless steel anti-fingerprint, with a pocket handle design. This is the version to compare with a replacement if visible finish and door grip matter. Bosch gives body dimensions of 33 7/8 x 23 9/16 x 23 3/4 inches, in height-width-depth order, and a required opening of 33 7/8 in x 24 in x 24 in. Measure the opening and consult the installation instructions; the cutout and appliance measurements serve different purposes. The interior tub is listed as stainless steel. That material is a separate specification from the visible exterior color and should not be inferred from a product photograph. The matching Bosch sheet separately specifies a black toe kick. That lower strip can stay visible after installation, so check its color against the cabinets rather than judging only the stainless door. The toe-kick entry is a cosmetic specification; it gives no permission to reuse an older panel or trim without following the installation instructions.
Program choices
A practical way to read the SHP78CM5N program list is to begin with the load rather than the series badge. Bosch names Heavy, Auto, Normal, Speed 60, Favorite for this SKU. Choose among those actual entries, then use a compatible option if the controls offer it; a program visible only in Home Connect belongs to a different menu. Favorite can preserve a chosen combination after setup. The product sheet does not establish that a shorter-named program will suit every load or eliminate the need to arrange dishes correctly. On this exact listing, Speed 60 is an appliance program while Machine Care is in the Home Connect-only list. Keep those access routes separate when a household expects a control to be on the physical selector.
Model configuration
Bosch lists SHP78CM5N as a 800 Series built-in dishwasher with room for 16 place settings and a published 42 dBA sound rating. The model number matters when reading support material: similarly named units can have different door treatments, program menus or indicators. ZoneControl Front appears in the published option list, whereas Machine Care is identified with the connected menu. An option can depend on the selected program; the specification alone does not prove every combination is available.
Drying and controls
Bosch lists an audible end-of-program signal for SHP78CM5N. Listen for completion before judging a damp load or opening the door to unload; the sound is an operating cue, whereas a displayed fault or unusual LED pattern belongs to the manual’s diagnostic table. Home Connect can show progress after setup, but it does not identify the cause of a blocked drain or closed supply valve. Use the exact control layout and the cited instructions for a real warning. Bosch lists Crystal Dry among the controls and CrystalDry, PureDry as the installed drying system. If Speed 60 finishes with water in concave pieces, check the selected drying option and rinse-aid guidance before assuming a defect.
Reading the manual diagnostics
The linked manual for SHP78CM5N gives individual alphanumeric faults rather than a single generic 'dishwasher error.' E:30-00 and E:31-00 concern active water protection and call for closing the water valve and contacting Bosch. E:32-00 instead points to the inlet path, such as a closed valve or kinked hose; E:34-00 describes water continuing to enter. These similar-looking numbers lead to different checks, so read the full characters on the display before taking action. A further exact-manual example is E:61-02: it describes a loose pump cover or an object blocking the pump; use the manual’s safe pump procedure. This is a different subsystem from the other codes above, so record the complete display before choosing an owner-level check.
Verified model details
16 place settings and 42 dBA noise rating.
Source for this detailPrograms: Heavy, Auto, Normal and Speed 60; options: Sanitize and Crystal Dry.
Source for this detailWashing: PrecisionWash® and PowerControl™ Spray Arm; drying: CrystalDry® and PureDry®; Home Connect remote monitoring and control.
Source for this detailZoneControl™ offers front, back and custom wash-region choices.
Source for this detailPocket handle.
Source for this detail
This description summarizes the linked source documents; check each cited source for your exact model and region.
Manufacturer source
Open official source
Bosch SHP78CM5N dishwasher product page and manuals
Open official sourceIf there is a safety risk, stop using the appliance and follow the manufacturer’s instructions.